This contraption will allow you to collect plorts from a corral automatically without player intervention. Since this contraption works without player intervention, it removes the ability to manipulate the plort market.
Building Materials
To build this contraption, avrai bisogno…
- 3 Accelerators
- 1 Refinery Link
- 1 Market Link
- 9 Easy Breezy Fans
- 13 Large Pinwheels
- 1 Stunt Cannon
Building the Collection System
Placing the Cannon
Place a Large Pinwheel as close to the corral as possible, aligned with the center of the corral wall.
Place a Large Cannon inside the pinwheel, facing directly outwards from the corral.
Premere “E” once on the cannon to make it aim slightly upwards.
Placing the Refinery Link
Align your cross-hair with the section of the cannon shown in the screenshot below.
With your cross-hair still in the same position, move backwards and place a Large Pinwheel as close to the cannon as possible.
Place an Accelerator inside of the pinwheel, facing directly to the right (parallel to the corral wall).
Once you have placed the Accelerator, test it by shooting food into the cannon. The food should be redirected by the Accelerator.
If the food is not being sent through the Accelerator, retry placing the pinwheel and Accelerator, and test it again.
Place a Refinery Link inside of the Accelerator, facing directly to the left (parallel to the corral wall).
Placing the Market Link
Place a Large Pinwheel as close to the Refinery Link as possible, and between the cannon and the Refinery Link.
Place another Large Pinwheel as close to the corral wall as possible, aligned with the previous pinwheel.
Place an Accelerator inside the second pinwheel, facing towards the inside of the corral.
Place another Accelerator inside the first pinwheel, facing towards the corral.
Once you have placed the Accelerator, test it by shooting food into the cannon. The food should be sent through the Accelerators and back into the corral.
Place a Market Link inside this Accelerator, facing directly to the left (parallel to the corral wall).
The Result
The final collection system should look something like this…
Placing the Fans
Placing the Pinwheels
The position of these pinwheels does not need to be exact, just make sure to place them as close to the corral walls as possible.
Across the corral wall opposite to the collection system you build previously, place five Large Pinwheels in roughly this orientation…
On the left and right corral walls, place two Large Pinwheels in roughly the following orientations…
Placing the Fans
The rotation of these fans does not need to be exact, just make sure to place them inside of the Large Pinwheels.
Across the corral wall opposite to the collection system, place five Easy Breezy Fans in this orientation…
On the left and right corral walls, place two Easy Breezy Fans in the following orientations…
Once you have placed all of the fans in the correct orientation, you can remove the Large Pinwheels and use them again later.
