Basic instructions for adjusting the config.ini file of the game to enable widescreen resolution. 구체적으로, targeting a resolution of 720p at a refresh rate of 60Hz.
요구 사항
To initiate the required adjustments, navigate to the config file located in the “My Documents” 예배 규칙서. The following modifications are necessary:
- Adjust the resolution to 1280×720 (메모: proper support for 1280×800 is not available in the game).
- Set the refresh rate to 60Hz. (기본적으로, it is set at 90Hz, which leads to incorrect resolution changes.)
- Incorporate windowed mode into the configuration.
Instructions
To modify the configuration file on the Steam Deck, switch to desktop mode and proceed to the specified folder in “My Documents”:
/home/deck/.steam/steam/steamapps/compatdata/24880/pfx/drive_c/users/steamuser/My Documents/My Games/The Saboteur™/SaveGames/
Access the config.ini file and adjust the settings as follows:
DisplayProfile 0 ScreenWidth 1280 ScreenHeight 720 TextureQuality 3 SliceQuality 2 ClipRange 3 ObjectQuality 2 RainDensity 75 그림자 1 RefreshRate 60 PostProcessing 1 VSync 0 Windowed 1
These modifications serve several purposes: they adjust the refresh rate to 60Hz, deactivate V-sync, and introduce a command to enforce windowed mode. 뿐만 아니라, I opted for a 720p resolution instead of 1280 엑스 800, as the latter tends to distort a 4:3 aspect ratio and does not truly represent widescreen format.
추가적으로, it’s crucial to switch the controller setting on Steam to “게임패드” since it defaults to “Keyboard and Mouse.”
Please note that while it’s been reported that the refresh rate can be increased to as high as 85Hz before affecting the resolution, my tests have been limited to 60Hz.
