Un método súper sencillo para mostrar qué unidad está alimentando un transmisor.
The Problem
It is very hard to know what unit a power transmitter is sending power to once you have set one up, and you have lots of transmitters.
Solución
All you need to do is drag the transmitter target register into the building’s «almacenar» register. This will send any items in the building into the unit, so I recommend making dedicated transmitter buildings that don’t use their storage. The 1×1 Medium slot building is the cheapest medium slot available.
Ahora, you should be able to see the line tracing the transmitter to the unit it is powering. If you cannot, cycle through the register display modes, the default key being TAB.
esta guía sobre Desincronizado fue escrito por
Starwhip.
Puedes visitar la publicación original desde este Enlace.
Si tiene alguna duda sobre esta guía, por favor no dude en comunicarse con nosotros aquí.
