It’s very easy to achieve, but you’ll a bit of time. Just get to 300 PSI then open the throttle valve and wait.
Jak dostać się do 650 RPM
Getting to 300 PSI
- Fill the tank with water ( hold L )
- Put heat to 100% ( 1 + SCROLL )
- Disable relief valve ( press X )
- Disable brake ( 3 + SCROLL )
- Open throttle valve 1% ( 2 + SCROLL )
- Start engine ( hold SPACE ). The Engine should start spinning
- Now just wait
Getting 650 RPM
Jeśli masz 300 PSI do this:
- Open throttle valve 100% ( 2 + SCROLL ). RPM should reach around 630 RPM now.
- Refill the tank with water constantly ( hold L ). If you don’t want to hold L, hold it and switch to another program/window it will continue without you pressing a button.
- Manually turn the engine ( hold SPACE | You can use the same trick as with the water). I don’t really know if this makes a difference.
- If you followed these steps, you need to wait until it randomly reaches 650 RPM
W moim przypadku, the steam engine reached 878.5 RPM.
Ten poradnik o Steam Engine Simulator został napisany przez
ONE KEBAP PLEASE.
Możesz odwiedzić oryginalną publikację z tego połączyć.
Jeśli masz jakiekolwiek wątpliwości dotyczące tego przewodnika, nie wahaj się z nami skontaktować tutaj.
